User manual

Getting Started
27
Note
The new password takes effect immediately. You are prompted to enter it when
completing the next step.
The quick setup wizard is displayed.
Changing the Hostname is not typically necessary.
Select how you would like to set up your LAN connection then click Next.
Note: You must select Manual configuration in order to enable the SG unit’s built-in
DHCP server. The SG unit’s DHCP server automatically configures the network settings
of PCs and other hosts on your LAN.
Changes to the SG unit’s LAN configuration do not take effect until the quick setup wizard
has completed.
 Select Manual configuration to manually specify the SG unit’s LAN connection
settings (recommended).
 Select Skip: LAN already configured if you wish to use the SG unit’s initial network
settings (IP address 192.168.0.1 and subnet mask 255.255.255.0) as a basis for your
LAN settings, and you do not wish to use the SG unit’s built-in DHCP server. Skip to
the next step.