User manual

Getting Started
33
SG PCI Appliance Quick Setup
Unpack the SG unit
Check that the SG CD is included with your appliance:
On the SG unit is a single 10/100 network port, a Reset button and four LEDs (lights).
The LEDs provide information on the operating status of your SG unit. The two LEDs
closest to the network port indicate network link and network activity.
The two LEDs furthest from the network port indicate Power and Heart Beat. The Heart
Beat LED blinks when the SG unit is running. The Power LED is ON when power is
applied.
Install the SG unit in an unused PCI slot
Power off your PC and remove its cover.
Select an unused PCI slot and insert the SG unit.
Power on your PC.
Install the network driver on your PC
The SG unit is automatically detected and the appropriate driver is installed when
Windows starts up. It is detected as a Realtek RTL8139-series Fast Ethernet Adapter.
Note
You can check that a new network adapter has been installed by clicking Start ->
(Settings ->) Network and Dialup Connections -> Local Area Connection (possibly
followed by a number) -> Properties and ensure the adapter is listed in the Connect
using field.