User manual

Getting Started

In the row labeled Bridge, click the Modify icon.

Note

The purpose of this step is to configure the IP address for the web management console.

For convenience, this is generally a free IP address on your LAN.



If your LAN has a DHCP server running, you may set up the SG unit and your PC to

obtain their network settings automatically. Proceed to Automatic configuration.



Otherwise, you must manually specify network settings for both the SG unit and your

PC. Proceed to Manual configuration.

Automatic configuration

Before continuing, ensure your DHCP server has two free leases. One is used for the

web management console, the other for your PC.

Note

It is strongly recommended that you reserve the IP address to be used by the web

management console using the SG unit’s MAC address. In bridged mode, this is the top

MAC address of the three displayed on the SG unit itself.