User manual

Getting Started
40
From a network security standpoint, it may be desirable to disable the Reset switch after
initial setup has been performed. This is accomplished by removing the jumper linking
CON2 on the SG unit. This jumper is labeled Remove Link to Disable Erase.
The SG Management Console
The various features of your SG unit are configured and monitored using the
management console. Follow the steps from the beginning of this chapter to set up your
PC to access the management console.
The main menu is displayed on the left hand side. Navigate your way around and get a
feel for the SG unit’s features by clicking the corresponding link in the main menu.
The remainder of this user manual is roughly divided into
chapters based on the main menu section heading, e.g.
Network Setup, Firewall, etc. Chapter sections roughly
correspond to the menu items under each heading, e.g. DHCP
Server, Web Cache.
Help
To access help for the current page, click the blue help icon on the top right hand side of
the.screen.
Each field is described, along with acceptable input values where appropriate. To search
the entire contents of the help system, enter search Keywords and click Search.
Backup/restore configuration
Hover your mouse over the black backup/restore icon on the top right hand side of the
screen to display the date on which configuration changes were last backed up. Click the
icon to backup or restore backed up configuration; see the Backup/Restore section of the
chapter entitled System for details.