User manual

Network Setup

Warning

We strongly recommend that the wireless interface be configured as a LAN connection

only if wireless clients are using WPA-PSK encryption/authentication. This is discussed

in further detail later in this section.

Configuring a Direct Connection is described in detail in the section entitled Direct

Connection towards the beginning of this chapter. See the sections DMZ Network and

Guest Network earlier in this chapter for further discussion of these network types.

In addition to connection configuration, you may also configure wireless access point,

access control list (ACL) and advanced settings. These settings are described in the

following section.

Note

A walkthrough for configuring your SG unit to bridge wireless clients directly onto your

LAN is provided in the section entitled Connecting wireless clients, towards the end of the

Wireless section.

Basic wireless settings

To edit basic wireless settings, click the Edit icon alongside the Wireless network

interface, click the Wireless Configuration tab, then the Access Point tab. Each of the

fields is discussed below.