Third Party Verification Claim

ManualsBrandsSecure Set ManualsBuilding materials4 Gal. High Density Polyurethane Foam White 20 Post Kit

GRA Services International, 5000 E. 2

Street, Edmond, OK 73034 Material Safety Data Sheet

Code: R “B”

Issue date: 3-1-96

Updated: 9/28/15

I. Product Identification - Rigid “B” Component

Product Name: Secure Set Two-Component Water-Blown Foam

Product Code: GRA 2, 2.8, 4, and 6

Chemical Family: Polyol

Chemical Name: Polyether Polyol

Synonyms: Polyol, Urethane Resin, “B” Component

CAS Number: N/A

TSCA Status: On Inventory

II. Hazardous Ingredients*

Components: Weight % Current TLV/PEL

Silicone Surfactant 1 – 5% N.E.

Tertiary Amine CAS# Trade Secret 0.1 – 1% N.E.

* Ingredients not precisely identified are proprietary or not hazardous. Values are not product specifications.

III. Physical Data

Form: Viscous Liquid

Color: Colorless to light yellow

Odor: Slight

pH: Approximately 7

Freeze Point: Not established

Boiling Point: >300 C (>572 F)

Flash Point: >93.33 C (>200 F)

Vapor Pressure: Not established

Specific Gravity: 1.09

Solubility In Water: Partially soluble

Decomposition Temperature: Not established

Viscosity, Dynamic: Approx. 1,200 cP

Bulk Density: Approx. 9.09 lb/gal

Pour Point: Approx.. –41.67 C (-43 F)

Hygroscopicity: Hygroscopic

IV. Fire & Explosion Data

Flash Point: >200°F. (93.33°C.)

Flammable Limits In Air By Volume -

Lower: N.E (Nonvolatile Fluid)

Upper: N.E (Nonvolatile Fluid)

Extinguishing Media: Dry chemical extinguishers such as Monoammonium Phosphate, Potassium Sulphate, Potassium Chloride.

Additionally, Carbon Dioxide, high expansion (Protenic) chemical foam, water spray for large fires.

Special Fire Fighting Procedure: Do not direct solid water stream or foam into hot, burning pools; this may cause frothing and

increase fire intensity. Use self-contained breathing apparatus and body covering protective clothing; burning

can produce oxides of carbon and nitrogen.

V. Health Hazard Information

Animal Toxicity

Oral, LD50 (ingestion): >5000 MG/KG (Rats)

Dermal, LDS50 (skin contact): >5000 MG/KG (Rabbits)

Inhalation, LC50 (4 HR): N.E.

Eyes: N.E.

Skin: N.E.

Aquatic, LC50 (24 HR): N.E.

Summary of content (2 pages)

PAGE 1
GRA Services International, 5000 E. 2nd Street, Edmond, OK 73034 Material Safety Data Sheet Code: R “B” Issue date: 3-1-96 Updated: 9/28/15 I. Product Identification - Rigid “B” Component Product Name: Product Code: Secure Set Two-Component Water-Blown Foam GRA 2, 2.8, 4, and 6 Chemical Family: Chemical Name: Synonyms: CAS Number: TSCA Status: Polyol Polyether Polyol Polyol, Urethane Resin, “B” Component N/A On Inventory II.
PAGE 2
Material Safety Data Sheet continued (R “B”) Page 2 Human Effects of Overexposure Inhalation: May cause irritation to the throat and respiratory passages but at room temperature, vapor inhalation is not considered hazardous. Skin: This product contains amine catalyst and will cause irritation to the skin after prolonged exposure. Ingestion: This is not considered a common occupation route of exposure, and no observable effects have been seen.