User's Manual

Installation Kit: One (1) retaining screw for securing the repeater
into the wall socket
Listings and Approvals
FCC Part 15 QNP-433RPT4
IC (Industry Canada) 4676A-433RPT4
UL/ETL
FCC & IC COMPLIANCE STATEMENT*
This device complies with FCC Rules and Regulations as Part 15 devices, as well as Industry
Canada Rules and Regulations. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Conformité Réglementaire
Ce dispositif est conforme à la réglementation de la IC et (Partie 15) de la FCC. Son
fonctionnement est soumis à deux conditions : (1) ce dispositif ne doit pas causer
d’interférences nuisibles, et (2) ce dispositif doit accepter toute interférence reçue, y compris
les interférences pouvant entraîner des conditions de fonctionnement indésirables.
IMPORTANT INFORMATION ABOUT RADIO DEVICES
1. AT&T radio controls provide a reliable communications link and fill an important need in
portable wireless signaling. However, there are some limitations which must be observed.
2. For US installations only: the radios are required to comply with FCC rules and regulations
including FCC part 15 devices. As such, they have limited transmitter power and therefore
limited range.
3. A receiver cannot respond to more than one transmitted signal at a time and may be blocked
by radio signals that occur on or near their operating frequencies regardless of code settings.
4. Changes or modifications to the device may void FCC compliance
5. Infrequently used radio links should be tested regularly to protect against undetected
interference or fault.
6. RF signals can be affected by metal objects including metal doors or large mirrors. Care
should be taken to avoid these objects during installation as they can interfere with proper
operation.
WARNING: The polarity of the battery must be observed. Improper handling of lithium
batteries may result in heat generation, explosion or fire which may lead to personal injuries.
Replace only with the same or equivalent type of battery as indicated in the General
Specifications.