User's Guide

OWL Installation and User Guide v1.1 27 August 2020

sa-owl user guide v1.2.docx

SecureALL Corporation, Proprietary Page: 3/9

Figure 2: CT30WRC that is upgraded by SA-OWL kit and connected to CT30 Wall Reader. Representative digital Input/output.

Kit Components

Each retrofit kit contains the following component:

1. SA-OWL PCB Assembly

2. Antenna with cable

3. Mounting screws

Required Tools

1. Small Philips screwdriver

2. Large flat screwdriver or drill with 3/8” (10mm) drill bit to open knock-out or drill hole into door

power supply enclosure.

3. PLCC Extraction tool: Manufacturer: “Jonard Tools”, Part Number: “EX-6”

Available from SecureALL or Digi-Key:

https://www.digikey.com/product-detail/en/jonard-tools/EX-6/K374-ND/135076