User Manual

SecureDrive BT User Guide ▪ 7
Adding the Drive to the App (Pairing)
The eight-digit Device ID is required; is it printed on the Drive.
To add the drive, follow these steps:
Adding the Drive
LED
APP
1. Connect the Drive to a computer with the USB cable.
(one blink)
Then
-
2. Start the SecureData Lock App on your device.
Note: Ensure your device is BT enabled.
-
3. Tap if you don’t see the new Drive’s SN in the list.
4. Tap the Drive name that appears and follow the app instructions.
-
5. Tap Continue and follow the app instructions.
-
Unlocking the Drive
CAUTION: Possible loss of data. After ten failed attempts to unlock the Drive, the password, all
data, and the formatting will be deleted. Refer to Brute Force Hacking Detection on page 19.
Until the Drive is unlocked it does not display in your computer’s File Manager (Explorer or Finder).
To unlock the drive, follow these steps:
Unlock the Drive – When NOT Connected
LED
APP
1. Connect the Drive to a computer with the USB cable.
(one blink)
Then
-
2. Start the SecureData Lock App on your device.
-
3. Tap the Drive name.
4. Type in the password
1
and tap Unlock.
Unlock the Drive – After waking up from sleep
LED
APP
1. Open the app.
or
2. Tap the Drive name.
-
3. Type in the password1.
-
4. Tap Unlock.