User Manual

OVERVIEW USER MODE ADMIN MODE MANAGING DRIVE CONTACT & WARRANTY
SecureDrive KP User Guide ▪ 10
2.13.2020
Creating or Changing a User PIN in Admin Mode
For PIN requirements refer to page 4.
STEPS
LED
ERROR STATE
With the Drive locked, press and hold down 1-and then
press- .
-
Enter your Admin PIN.
- if error, the red LED fades out then turns
solid.
Press .
-
Wait for , then press .
-
Enter a new User PIN.
-
Press .
If an error occurs:
fast + slow
Re-enter the User PIN.
-
Press .
- if error, the red LED fades out then turns
solid.
If successful, the User PIN is now added or changed.
Changing the Admin PIN
The Admin PIN cannot be changed from the User Mode. Remember that Press and hold down 1-and then
press means “hold down #1 button and press the Key button twice.” PIN requirements on page 4.
STEPS
LED
ERROR STATE
With the Drive locked, press and hold down 1-and then
press- .
-
Enter the Admin PIN.
-
Press .
- if error, the red LED fades out
then turns solid.
Wait for , then press and hold down 1-and then
press- .
-
Enter a new Admin PIN.
-
Press .
If an error occurs:
fast + slow
Re-enter the Admin PIN.
-
Press .
- briefly
Then 
fast + slow
Then 
- if error, the red LED fades out
then turns solid.
Note: If a mistake is made while defining a new Admin PIN or the procedure is not completed, the Drive
retains the old Admin PIN (as well as the old User PIN if one exists).