User Manual

OVERVIEW USER MODE ADMIN MODE MANAGING DRIVE CONTACT & WARRANTY
SecureDrive KP User Guide ▪ 3
2.13.2020
SecureDrive Features
LED Interpretations
LEDs on the SecureDrive are represented here by colored icons.
LED
Meaning
(blink all together once)
Plugged into computer; LED test
= Red solid
Locked; Momentarily preparing for next input; or failed procedure.
= Red blinking
1
Locked, ready for input (other than a Setting code). Also, specific feedback
1
= Red blinking with
Green solid
(Settings Mode) Locked & ready for keypad input within 10 seconds, or idle for 30
seconds if procedure is done.
= Green blinking
Unlocked and ready for keypad input
= Green blinking
slowly
Unlocked for use in Read-Only Mode
Blue solid
Blue blinking
Drive is powered and when blinking is transferring data.
Note: The blue LED may be on or blinking during any procedure after the Drive is
unlocked.
= Green solid
Unlocked; operation was successful.
1
For other LED combinations see specific status requests: Verifying Existing PIN and Determining the Version
Number described in this manual.