User Manual

OVERVIEW USER MODE ADMIN MODE MANAGING DRIVE CONTACT & WARRANTY
SecureDrive KP User Guide ▪ 4
2.13.2020
PIN Requirements
Your User PIN or Admin PIN must:
 be between 7-15 digits in length
 not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3)
 not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4), (7-6-5-4-3-2-1)
Note: Creating words (using the corresponding number key for each letter) can be more
memorable than a string of numbers.
Procedural Conventions
All procedures below require the Drive to be connected to a computer with the USB cable. LED status
shown is what you should see after performing each step. Unless otherwise noted, all procedures start with
the Drive locked. [ ]
Note: Each step in all procedures listed below have a 10 second window to perform the next step. In
general, a blinking LED times out after 10 seconds.
Cancelling a Procedure
To cancel most procedures prior to finishing, press and hold for six seconds. The exception are
procedures for setting options ( ) which you can just let time out between steps.