Operating instructions

2
201114-01
Motion Motion
IMPORTANT SAFETY AND INSTALLATION INFORMATION
Beforeinstallingsecuritylight,readallinstructionscarefullyandkeepowner’smanualforfuture
reference.
•WARNING:Topreventelectricshock,pleaseensurethatpowerisdisconnectedbeforeinstallation.
•WARNING:Riskofre. Keepxtureatleast51mm(2")fromcombustiblematerials.Donotaimatobjects
closerthan1meter(3feet).
• CAUTION:Allowxturetocoolbeforetouching.ebulbandthextureoperateathightemperatures.
•CAUTION:UseonlyT3,250W(maximum)tungstenhalogen230VAClamps.
•CAUTION:Keepthesensoratleast25mm(1")awayfromthebulb.
•CAUTION:esensormustbemountedbelowthelamphousingforwallinstallations.
•isxturemustbeconnectedtoa230V-240V~50Hzpowersource.
•exturemustbeproperlygrounded.
•isxtureisdesignedforoutdoorinstallationandshouldbemountedtoawalloreaves.
• Toachievebestresults,thisxtureshouldbemounted2.4meters(8feet)abovetheground.Note:Ifxture
ismountedhigherthan2.4meters(8feet),aimingthesensordownwillreducecoveragedistance.
•Donotusedimmerswitchesortimerswiththisxture.
•Replaceanycrackedorbrokensafetyshield.
esensoronthislightxturedetects“motion”bythemovementofheatacrossthecoveragearea.How-
ever,followingareexamplesofobjectsthatalsoproduceheatandcancausethesensortotrigger:
•PoolsofWater •AirConditioners •DryerVents •Animals
•HeatingVents •AutomobileTrac
Ifyoususpectthataheatsourceofthistypeistriggeringthesensor,reducethesensitivity.
esensoronthisxtureismoresensitivetothemovementofheatmovingacrossthecoveragearea
andlesssensitivetothemovementofheatdirectlytowardsit.
Note:Lightxtureandsensorshouldbemountedasshownabovewheninstalled(dependingupon
typeofinstallation).
Wall Mount Eave Mount
Least Sensitive Most Sensitive
Sensor
1m