Quick Start Guide

If you have a chime installed, follow option A; if not, follow option B.
In your doorbell accessories, locate the
two “U” shaped extension wires. Attach
the opposite ends of both “U” wires to
each of the existing doorbell wires. Twist
both sets of wires together with wire
connector caps.
Connect the “U” end of each “U” wire to
the terminals on the back of the doorbell.
Tighten into place with the fixing screws.
Attach the fuse wire to an existing
doorbell wire, then to the opposite end
of one of the “U” wires, twisting the wires
together with wire connector caps.
Attach the other “U” wire to the
remaining existing doorbell wire and
twist together with a wire connector cap.
Connect the “U” end of each “U” wire to
the terminals on the back of the doorbell.
Tighten into place with the fixing screws.
OR
Wiring the doorbell camera
OPTION A
OPTION B
If you do not have existing doorbell wiring, a
12VAC - 24VAC, transformer power adapter (not
included) can be ran from an internal power
outlet through the wall to the doorbell camera.