Spec Sheet

AQD5-8C1R
Power Supply
The AQD5-8C1R power supply with battery
charger/backup and supervision is a dual voltage
switching power supply with a fire transfer relay that
uses any AC power source from 90-240VAC/43-63Hz
to provide up to 5 Amps @ 12VDC or 3 Amps @ 24VDC
total output.
FEATURES:
• Clean, steady, accurate power output for best performance of access control equipment
• Field-selectable dual voltage 5A/3A @ 12/24VDC
• Compact modules for smaller footprint
• Universal transformer compatible with most international power
• Works in AC brownout down to 60 VAC
• Faster battery recharging under full load
• Automatic low-battery disconnect prevents deep discharge, maintains battery life
• Self-resetting circuit breakers for common conditions including:
o Overcurrent
o Thermal runaway
o Reverse battery hookup
• Class 2 power limited output
• Eight (8) channel power distribution with fire relay trigger
o Channels individually selectable to ON/OFF/Always ON in response to fire relay
o Power limited protected outputs, each with a green status LED indicator
o Main power green/red LED indicates AC, DC or Reversed DC input
o Main fuse/power pull to disconnect board from input power
o Latching or non-latching
• Fuse protected against surge for AC input and DC output
• SPDT Form C outputs for remote monitoring of:
o AC failure
o Low battery
o Trigger status
• Made in USA
• MagnaCare Lifetime Replacement No Fault Warranty
• UL and ULC Listed