Installation Instructions

User Settings
In the User Settings block of the Configure
screen, you can enter the user names,
passwords, access levels, and password
complexity for the Securitron Netlink board.
The default user is “admin” and the password for this
account is also “admin”. It is highly recommended
to change this user name and password for security
reasons. Click Submit when done. Note that there
must ALWAYS be at least one admin-level user.
Adding a New User
To add another user, first select the
Authorization level desired for the user.
Three authorization levels are available:
• ADMIN Admin-level users have full control over
the Securitron Netlink. There are no restrictions.
• MANAGER Manager-level users have access to all areas
of the Securitron Netlink except for the Configure page.
• GUEST Guest-level users may only view information
on the Securitron Netlink screens. No changes can be
made and none of the control features are available.
After selecting the Authorization level, enter the new
user name in the User Name column and enter the
password into the Password column. Passwords must
meet the complexity level setting requirements. Re-
enter the password into the Verify Password column.
After clicking Submit, the new user will be
active and another blank row will appear
for entering the next user name.
Select Certificate
The Securitron Netlink allows a user-supplied
certificate to be used. Click the Select Certificate
button to enter the Import Certificate screen.
Contact your IT department for more information.
1 Click the Choose File button to select the
certificate to be used, then click Download,
then Confirm to download the certificate.
2 Click the Submit and Test button to
use and test the certificate.
SSL Protocol &
CipherSuite Settings
This section allows the user to select which SSL
protocol to use. The default setting is Normal.
Certificate Log
• Click Show Certificate Log to view
the certificate activity log.
• Click Hide Certificate Log to hide the window.
28