Spec Sheet

AQU244

Power Supply

The AQU244 power supply with battery

charger/backup and supervision is a single voltage

power supply that uses any AC power source from

90-240VAC/47-63Hz to provide up to 4 Amps @

24VDC continuous output.

FEATURES:

• Clean, steady, accurate power output for best performance of access control equipment

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including:

o Overcurrent

o Thermal runaway

o Reverse battery hookup

• Fuse protected against surge for AC input and DC output

• Auto-sensing variable speed smart fan

• Power module has ON/OFF switch to disconnect DC output from power

• SPDT Form C output for remote monitoring of trouble: AC failure, Low battery, or over

voltage

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL and ULC Listed

PAGE 1
AQU244 Power Supply The AQU244 power supply with battery charger/backup and supervision is a single voltage power supply that uses any AC power source from 90-240VAC/47-63Hz to provide up to 4 Amps @ 24VDC continuous output.
PAGE 2
SPECIFICATIONS: AQU244 Electrical Supervision/Monitoring Input Voltage Operating Range AC ON LED indicator: 6mA DC ON LED indicator: 6mA Trouble notification: SPDT Form C 200mA 120VAC 90-240VAC 47-63Hz Maximum Output Voltage 120 VA 5 Amps @ 24VDC Environment Continuous Output Voltage Operating Temperature: -4 to +104˚F [-20 to +40˚C] Humidity: 95% RH non condensing 96 VA 4 Amps @ 24VDC Mechanical Voltage Range Enclosure: 14”x 14” x 4.75” 9.8 – 13.67VDC/ 13.