Manual

Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader
Tel [phone] [e-mail]
in door opening solutions
© Copyright, 2011, all rights reserved PN# 500-22140
Page 1 Rev. D, 03/11
SASM KIT STRIKE INSTALLATION
 The 1/2” holes are each spaced 2-1/4” FROM THE CENTER HOLE
 The hard rubber washer is an electrical insulator used to keep the strike electrically isolated form
the mounting framework and hardware. THE RUBBER WASHER MUST BE INSTALLED.
 Use a 3/4” open ended wrench to hold the suspension bolt while tightening the strike mounting
screw.
 The rear mounted roll pins in the existing or new strike must be replaced with the included 2-1/4”
long roll pins.
Patents
Securitron’s Shock Absorbing Strike Mount Kit is patent pending.