Installation Instructions
QUICK START GUIDE
© 2020 Security Brands, Inc. All rights reserved. QSG-14500-EN Rev. B (6/2020)
2 of 6
CAUTION!
The receiver is not weatherproof and must be mounted inside a
weatherproof enclosure. Internal components can be damaged if
exposed to the elements.
Failure to comply will VOID WARRANTY.
5a
Connect Receiver
Ridge Receiver
12–24 VAC/DC
POWER
RELAY A
12–24 VAC/DC
POWER
Gate Operator / Door Opener
POS. (+)
NEG. (–)
COM
REVERSE LOOP
COM
OPEN
STOP
CLOSE
OR
12–24-VAC/DC
Power Source
(Not Included)
NC
NEG. (–)
POS. (+)
+
–
COM
NO
FREE EXIT
COM
5b
Connect Receiver
COM
RADIO
Ridge Receiver
12–24 VAC/DC
POWER
RELAY A
12–24 VAC/DC
POWER
Gate Operator / Door Opener
POS. ( +)
NEG. ( –)
COM
REVERSE LOOP
COM
OPEN
STOP
CLOSE
12–24-VAC/DC
Power Source
(Not Included)
NC
NEG. ( –)
POS. ( +)
COM
NO
FREE EXIT
COM
COM
RADIO
Gate Operator Timer-to-Close
OFF
Gate Operator Timer-to-Close
ON
A closing gate can cause injury to
persons or damage to property.
ALWAYS USE SAFETY DEVICES!
CAUTION!
WARNING!
AUTOMATIC GATES CAN CAUSE SERIOUS INJURY OR DEATH!
ALWAYS CHECK
that the
GATE PATH IS CLEAR BEFORE OPERATING!
REVERSING
or other
SAFETY DEVICES SHOULDALWAYS BE USED!
3
Unlock and remove front panel of
keypad unit; then using included
carriage bolts and hex nuts, attach
unit to pedestal as shown.
4
Using Tek screws, zip ties, or
included adhesive mounting pad,
attach receiver to inside wall or
other surface of gate operator.
Consult gate operator or
door opener manual for
exact connections.
Terminals vary widely across
manufacturers and models.
Consult gate operator or
door opener manual for
exact connections.
Terminals vary widely across
manufacturers and models.
+
–
Model
14-REC20