- GE Everest XLG3TM VideoProbe System Operating Manual

User Manual Chapter 7 Measuring Features and Defects 97
9. (Optional) Perform any of these tasks:
10. Save the image.
Press . For details, see “Saving an Image” on page 61.
Task Menu Item
Add measurements, up to five total. Press . Select Measure > Add.
Clear some or all measurements. Press . Select Measure > Clear measurement.
Select the correct tip in the software (if the selected
tip is not the one that you are using).
Press . Select Measure > Tip.
Note
Stereo images are saved without zoom windows, borders, and certain other
screen graphics. This way, more of the image is visible if you recall it for
remeasurement.