Installation guide

20 LCD Keypad Installation Guide
LCD Keypad Installation Guide 21
Home/Away System Arming and Disarming
Present your card to the reader. If the system is armed, once the card is
validated, all areas are disarmed and the keypad displays ALL SYSTEM OFF. If
the system is disarmed when you present your card, once the card is validated,
HOME SLEEP AWAY displays. The user can manually select HOME, SLEEP, AWAY
or after a short timeout, all areas automatically arm in the AWAY mode.
Keypad Door Strike
Area and All/Perimeter Door Strike
From the Status List, present your card to the reader. Once the system
validates the card, the Door Strike relay activates. Home/Away systems only
activate the 7073/7073A/7173 or 793 Door Strike relay when arming and
disarming.
ABC SECURITY
MON 10:20 AM
While the keypad displays the
Status List, present your access card.
Typically, the relay activates for 5 seconds during which
time you can open the door. Once you open the door,
you have 40 seconds to exit and close the door before
the Zone 2 Soft-Shunt expires.
Figure 11: Present Access Card
Keypad Entry Delay
All Systems
Once the entry delay starts, the keypad sounds an entry tone and displays
ENTER CODE: - . Present your card to the reader. Once validated, the system
disarms all areas accessible by you and activates the 7073/7073A/7173 or 793
Door Strike relay. Area systems provide a delay to allow selected areas only to
be disarmed. See Keypad Arming and Disarming.
Entry delay starts.
The System disarms the area and activates the Door Strike Relay.
ABC SECURITY
ENTER CODE: –
Figure 12: Entry Delay