Manualshelf

Owner`s manual

ManualsBrandsSecurity Labs ManualsHome building and DecorSLC-171C
11121314151617181920
19
-The correct password needs to be entered before formatting the hard disk. The password is
the same as the default unlock password, which is 111111.
- Please set HDD to Master if only one is installed. Second HDD, if used, should be set to
Slave.
-
After installing slave HDD, format before recording
.
Main Menu – System Set – Security Protection - Password Change
Menu Protection:
On / Off. If set to “on”, you need to enter your password to access the menu.
Auto Key Lock:
After 1 ~ 120 seconds the system automatically goes into key lock mode. You will have to
“unlock” before operating the DVR.
Main Menu – System Set – Time Set