Use and Care Manual

7
DISCONNECT THE POWER FROM THE DVR BEFORE REMOVING THE COVER
.
Mount the HDD brackets in a reverse fashion on both sides of the HDD (Figure 1 and 2)
similar to the drive already installed in your unit.
Figure 1
Figure 2
The red SATA data cables are wired the same at both ends. Please observe the right angle
alignment key before inserting the cable into the hard drive or main PC board. The SATA
connectors on the main PC board are in order from front to back. Connect your first drive
closest to the front panel, then in order towards the back. Connecting the drives out of order
will not harm the drives, but makes them easier to locate should they have the same model
ID number. ID numbers of the drives are read electronically and displayed in the Utilities
Menu. Please refer to figure 3 for more layout and connection information.