Owner`s manual

10
? FREEZE the Channel:Press key [1~4], the 1~4 LED will turn on and freeze the image. To unfreeze,
press? QUAD? key again or wait until the FREEZE HOLD TIME period you have set elapses.
? PIP / POP DISPLAY: Displays Channels 1~4 PIP or POP on the monitor by pressing the function keys
[1~4] to display images. Follow the PIP / POP display setup on page 14.
3.2.2 SEQUENCE MODE.
? Press the? AUTO? key to enter AUTO SEQUENCE mode. The processor automatically changes to the
image, interval time and channels previously setup.
??Under AUTO SEQUENCE MODE, when no sequence has been set, the "NO SEQUENCE SETTING"
message will be shown on the monitor.
??Under AUTO SEQUENCE MODE, when all dwell times are set to 0, the "NO SEQUENCE TIME
SETTING" message will be shown on the monitor.
??Under AUTO SEQUENCE MODE, when no sequence video input has been set, the "NO SEQUENCE
VIDEO INPUT" message will be shown on the monitor.
??Under AUTO SEQUENCE MODE, when more than one setting (e.g. no sequence and the dwell time is
set to 0) is made simultaneously, the "SEQUENCE SETTING ERROR" message will be shown on the
monitor.
? When any key is pressed in AUTO SEQUENCE MODE, the processor will automatically return to
NORMAL DISPLAY MODE.
3.2.3 PLAYBACK MODE.
? Press the ? PLAY?function key, it will then enter into VCR PLAYBACK MODE, and the "VCR PLAY"
message will be shown on the monitor. In the VCR PLAYBACK MODE, the VCR OUT will change
to mute (blue background) and the unit will detect for video loss on channels [1~4].
??When the VCR is disconnected prior to entering PLAYBACK MODE the alarm automatically goes
ON, the "NO VCR" message is shown on the monitor, and the beeper sounds.
??When the VCR is disconnected, after entering PLAYBACK MODE the alarm automatically goes ON,
the "VCR LOSS" message is shown on the monitor, and the beeper sounds.
? Press the? PLAY?function key again in PLAYBACK MODE, the processor will then return to NORMAL
DISPLAY MODE.
? Press [QUAD] function key under VCR full screen image display, the processor will then freeze the full
screen image of the VCR and the message “FREEZE” will be shown on the monitor. To unfreeze press
the? QUAD? function key again, or wait until the VCR freeze hold times out.
? Press key [1~4], processor will display1~4quadrant 2 ?2 zoom image. To release zoom
display-press the? QUAD? key.