Owner`s manual

11
? Press key [1~4] again in 2 ?2 zoom image display, the processor will then freeze1~4quadrant 2 ?
2 zoom image and the message “FREEZE” will be shown on the monitor. To unfreeze, press? QUAD?
function key, or press key [1~4] again.
3.2.4 SYSTEM SETUP.
3.2.4.1 SYSTEM SETUP DESCRIPTION.
??Press the? MENU? function key to enter the MENU page (shown by Figure 1).
??Press the«?»and«?»buttons to change the field left and right. Pressing them more than 1 second
allows the field to change quickly left or right.
??Buttons«+»or«-»are used for increasing or decreasing a value. Pressing them more than 1 second
allows the value to increase or decrease by more than one value.
??After the setting value has been finalized, press the«?»and«?»buttons to change the field left or
right or press the« NEXT PAGE» key to disengage and leave this setting page.
3.2.4.2 DATE / TIME SETUP
Figure 1.
? DATE FORMAT: There are three kinds of DATE formats for display:
??? YY/MM/DD ? MM/DD/YY ? DD/MM/YY ?
Figure 2. DATE format with rolling mapping.
? DATE range: Year data from 2000 to 2099, Month data from 01 to 12, Day data from 01 to 30.
? The default is 2003? 01? 01
? TIME format: HH: MM: SS for display, Hour data from 00 to 23, Minute data from 00 to 59, Second
data from 00 to 59.
? LOCATION: There are six positions for the DATE / TIME display. On the LEFT TOP, TOP,
RIGHT TOP, RIGHT BOTTOM, BOTTOM and LEFT BOTTOM. (The default is BOTTOM)
YY? MM? DD MM? DD? YY DD? MM? YY
«+»
«-»
«+»
«-»
«+»
«-»
TOP
200
3
.
11.06
10
:
20
:
36
LEFT TOP
2003.11.06
10: 20: 36
RIGHT TOP
2003.11.06
10: 20: 36
... DATE/TIMES SETUP ...
DATE FORMAT: YY.MM.DD
DATE: 2003.08.27
TIME: 12:35:50
LOCATION: BOTTOM
MONITOR OUT DATE\
TIME: ON
VCR OUT DATE\TIME: ON
-- SEQUENTIAL SETTING —-
SEQUENCE:
A 1 2 3 4 . . .
DWELL TIME:
3 3 3 3 3 0 0 0