Owner`s manual

14
3.2.4.5 MOTION SETUP.
Figure 5.
? POWER ON MOTION AUTO OFF (ON): After power on auto, disable all motion (OFF setting)
or enable all motion (ON setting).
? SEN (Sensitivity): Control Threshold value. Range: 10 ~ 99, 99 has a higher sensitivity rate than 10.
? MD.NUM (Detected window No.) : Number of motion detection windows. Range: 04 ~ 45.
FOR EXAMPLE:
? When MD.NUM is set to "04" – to enable motion detection, 4 motion detection windows must exist.
? When MD.NUM is set to "15" – to enable motion detection, 15 motion detection windows must
exist.
? RE (Refresh time): Reference Image Change time, Motion velocity control. Range 01 ~ 99,
? DET: The motion detection from Cameras 1~4 is adjustable by disabling motion (OFF setting) or
enabling motion (ON setting).
? AREA: The motion detection window settings for each camera. Total of 192 (16 column?12 row)
motion windows can be set.
??Press the«?»and«?»buttons to move the red bar to AREA item.
??Press the? PLAY? function key to enter the AREA (motion detection windows) setup.
??Press the«?»and«?»buttons to change the cursor (pink window) left and right. Pressing them more
than 1 second allows the cursor to change quickly left and right.
MOTION SETUP
POWER ON MOTION AUTO OFF
SENS MD.NUM RE DET
CH1: 70 03 64 OFF AREA
CH2: 70 03 64 OFF AREA
CH3: 70 03 64 OFF AREA
CH4: 70 03 64 OFF AREA
BUZZER ALARM TIME: 3 SEC
RELAY OUT TIMER: 8 SEC
FREEZE HOLD TIMER: 30 SEC