Owner`s manual

16
? PIP – Places a small video image from a single channel within the Full Screen Display of the
listed channel. Allows user to view 2 channels at once.
? POP – Places a small video image from the remaining 3 channels within the Full Screen Display
of the listed channel. Allows user to view all channels at once.
? SON – The number of the channel being placed within the Full Screen Display of the listed channel.
? The options for the SON display of PIP on full screen are: CH1 (2,3,4), CH2 (1,3,4), CH3 (1,2,4),
CH4 (1,2,3)
? The SON display position setting range: X=0~15, Y=0~7.
3.2.4.7 LOAD DEFAULT & WATCH ALARM LIST.
Figure 7.
??Press the«?»and«?»buttons to move the red bar up and down. Pressing them more than 1 second
allows the cursor to move quickly up and down.
??Buttons«+»or«-»are used for increasing or decreasing a value. Pressing them more than 1 second
allows the value to increase or decrease by more than one value.
??After a value is set, press the«?»and«?»buttons one last time to finalize the set-up or to
disengage. To leave this set-up menu, press the« NEXT PAGE» key one last time.
? WATCH ALARM LIST: List of alarm event records.
1. Press the«?»and«?»buttons to move the red bar to the WATCH ALARM LIST.
2. Press the«+»or«-»buttons to enter the watch alarm list (This menu is read only).
WATCH ALARM LIST
LOAD FACTORY VALUE
LOAD FACTORY RESET
BORDER LINE COLOR: WHITE
BORDER LINE WIDTH: OFF
NTSC COLOR BAR: OFF
VIDEO SYSTEM CHANGE
NOW VIDEO SYSTEM: NTSC