Owner`s manual

17
Figure 8: Alarm event list Figure 9: Alarm message after Load
Default & Clear Alarm List operation.
3. Press the«+»or«-»buttons to skip to the front or next page.
4. Press the« NEXT PAGE» button to exit the watch alarm list page.
? The alarm list format:
0~ 40: Number of alarm event recordings
P01~ P05: Alarm list page number.
CH: Active channel.
AT: Active Type. (MD: Motion Detect. VL: Video Loss.)
DATE: Alarm active date.
TIME: Alarm active time.
? LOAD FACTORY VALUE: All system settings will return to the initial factory default settings.
(When this operation has been completed, the symbol “.” will be displayed.)
? LOAD FACTORY RESET: All system settings will return to the initial factory default settings and
clear all alarm list records. (When this operation has been completed, the symbol “.” will be displayed
on LOAD FACTORY RESET)
? BORDER LINE WIDTH : The border line width settings are adjustable by the
user.? OFF? 4\2? 8\4?
? BORDER LINE COLOR: The On Screen Display border line color is adjustable to:
? WHITE? GRAY? BLACK? BLUE? RED? MAGENTA? GREEN? CYAN? YELLOW?
? COLOR BAR: For calibrating the monitor.
If the video system (format) is NTSC, NTSC COLOR BAR: OFF is displayed, otherwise
PAL COLOR BAR: OFF is displayed.
? VIDEO SYSTEM CHANGE: Switch NTSC/PAL system.
P
:
01
NO AT CH YY.MM.DD HH\MM\SS
.........................
01 VL 2 2003.08.25 12:35:07
02 MD 3 2003.08.25 15:05:32
03 MD 1 2003.08.26 09:52:46
04 VL 4 2003.08.27 18:22:21
P
:
01
NO AT CH YY.MM.DD HH\MM\SS
........................
NO ALARM RECORD...
LAST ALARM LIST ERASER
AT:2003.08.27 12:37:10