Owner`s manual

9
Light Mode
Mode
FREEZE Mode
Key QUAD LED
flash
AUTO LED
light
PLAY LED light
MENU LED
light
4 LED light
4 LED light or
dark
4 LED light 4 LED light 4 LED light
¡Ð
4
CH4 Full
display.
Freeze /
Release CH4
image.
(AUTO LED
dark)
Back to normal
CH4 Full
display.
Enter to 2?2
image display of
quadrant 4.
Freeze / Release
2?2 image of
quadrant 4.
Decrease value.
-
PLAY LED
light
PLAY LED
light
PLAY LED dark
PLAY
Enter to VCR
PLAYBACK
mode.
(AUTO LED
dark)
Enter to VCR
PLAYBACK
mode.
Disengage from VCR
PLAYBACK mode.
MENU LED
light
MENU LED
light
MENU LED
light
MENU
NEXT PAGE
Enter to Menu
set-up mode.
(AUTO LED
dark)
Enter to Menu
set-up mode.
To Next Page or
Disengage from
Menu mode.
(MENU LED
dark)
3.2 OPERATING INSTRUCTIONS
3.2.0 Power On Reset and System Self-Test.
Each time during Power On (Plug In), the master controller starts up with the procedure of
warming-up and self-testing.
Normally video input detection format starts from CH1 to CH4. When CH1 is unconnected, video
input detection skips CH1 and starts from CH2 to CH4 and so forth.
??After POWER ON and when no cameras have been connected, the "NO VIDEO" message will be
shown on the monitor.
??After POWER ON and the cameras have been connected, any sudden disconnection will automatically
trigger the alarm, and the "LOSS" message will be shown on the monitor.
3.2.1 NORMAL DISPLAY MODE.
? FULL SCREEN DISPLAY: Displays the images from Channels 1~4 on the monitor by pressing the
function keys [1~4].
? QUAD SCREEN DISPLAY: Press? QUAD? , monitor will show images by quad from Channels 1~4.
? FREEZE mode: press? QUAD? key again when QUAD LED is turned on in Normal mode. Then the
QUAD LED will flash until the processor returns to Normal mode.