Installation manual

9.2 PATTERN POINT NUM

Pattern point number sets the highest preset number which the

tour will include. The tour will only include preset numbers from 1

through 32 which have been stored into the camera.

Example 1: If presets 1, 2 and 3 have bet set and stored in

the camera and the PATTERN POINT NUMBER has been set to

any number equal to “3” or higher, the tour will use preset points 1,

2 and 3. If the PATTERN POINT NUMBER is set to “2”, the tour

will only include presets 1 & 2.

Example 2: If presets 2, 7 and 10 have bet set and stored

in the camera and the PATTERN POINT NUMBER has been set

to any number equal to “10” or higher, the tour will use preset

points 2, 7 and 10 and ignore all other presets from 1 thru 10

which have not been set. If the PATTERN POINT NUMBER is set

to “8”, the tour will only include presets 2 & 7.

Use the UP & DOWN buttons to select PATTERN POINT

NUM and use the LEFT & RIGHT buttons to set it to the desired

preset number.

9.3 PATTERN DWELL TIME

Pattern dwell time sets the amount of time in seconds that the

camera will stay at each preset of the tour before moving on to the

next preset. It is adjustable from 5 to 255.

Use the UP & DOWN buttons to select PATTERN DWELL

TIME and use the LEFT & RIGHT buttons to set it to the desired

dwell time.