User`s manual

79
• • • • ALARM INPUT
The ALARM INPUT sub-menu located in the “Alarm” menu option consists of
12 settings that are used to configure how the IPcam-SD will respond when the
cameras alarm input port triggered. These settings are:
A. Channel – used to select which camera you want to configure.
B. Enable – enables/disables alarm input alerts.
C. Schedule – used to setup a camera failure schedule.
D. Action Area – used to control what the IPcam-SD should do when
an event occurs.
E. PTZ Activation – enables alarm input activated tour and preset
movement.
F. Notification Area – used to select how you want to be notified
when an event occurs.
G. Type – used to select the type of I/O protocol to be used.
H. Interval – alarm input delay time to record.
I. Delay – post-Record time frame.
J. Copy – copies the current configuration settings.
K. Paste – pastes the configuration settings to the selected camera.
L. Refresh – restores any changes made.
M. OK – saves the changes.
N. Cancel – exits the menu without saving the changes.
J K L M N
G
H
I
A
B
C
D
E
F