Full Product Manual

138
3. Open the IE Browser, in this demonstration we are using IE 9.0. Go into the “Tool”
and then click on the “Internet Options”. Next, click on the “Custom Level” and
browse down to “ActiveX controls and plug-ins” to “Enable” everything under the
ActiveX controls, then click “OK” to confirm settings as shown below.
4. To remote access IP camera, open Internet Explorer, for LAN (Local Area
Network) access, please use the local area networking IP address which is the
IP address assigned to the IP cameraZZZ, for example http://192.168.248.189.
For WAN (Wide Area Network) internet access, type the IP address given by
your Internet Service Provider at address bar(for example, http://67.88.133.244),
and press “Enter”. The login screen will appear, and Enter the username and
password. The Default User Name is admin, and the default Password: none, and
click “Login” to continue.