Full Product Manual

142
Fig3.4 Fig3.5
3. Once your Wi-Fi name has been selected, type in the password associated
with your Wi-Fi network (fig. 3.6). If the password space is already filled, delete
anything in the space and type in your password. Now tap on “Save” located on
the upper right hand corner of the screen (fig. 3.7) and tap “OK” on the “Saved
Successful” prompt (fig. 3.7).
NOTE: Password is case sensitive. If the password is incorrect, the message will still
show “Saved Successful”.
Fig3.6 Fig3.7
4. Go back to the live view screen. Unplug the Ethernet cable from the back of the
IPCam-SDII. Wait 30-45 seconds for the Wi-Fi access. Wi-Fi setup complete.
NOTE: Your camera screen will freeze once the Ethernet cable is unplugged. If the
password is incorrect, the camera screen will show “Failed to connect”.