SecurityMan ® CH 4 CH 3 CH 2 CH 1 SE T Mini-AirWatch 2.
Copyright Notice This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Warranty SecurityMan warrants that this product will be free from defects in materials and workmanship for period of time specified on the product packaging. This limited warranty shall commence from the date of purchase. SecurityMan Products warranty is not transferable and is limited to the original purchaser. If the product is found to be defective then, as your sole remedy and as the manufacturer's only obligation, SecurityMan will repair or replace the product .
Notice: 2.4Ghz wireless camera works at ISM band. It may cause interferences with other wireless equipment that operates at the same band. Please turn off one of the equipment to eliminate the interference. Product Assurance 2.4Ghz wireless camera will emit electromagnetic wave, just like other wireless products. But the output power of the products is lesser than other wireless products such as mobile phones. The 2.
Conditions Please read the following messages to make sure whether your working environment is suitable. • Ensure there is enough space around the receiver for ventilation. • The temperature should be kept between –20˚C and 50˚C (-4F – 122˚F). The relative humidity should remain from 20% to 80%.
Warning: • In order to avoid inflammation or electric shock, this machine should be kept away from exposure to rain or moist, and it shall not be put in or near bathrooms, washing pools, washhouses, moist basements, or swimming pools. • In use of sockets set on walls or extension wires, attention should be paid not to exceed their load capabilities to avoid inflammation or electric shock; • Casings are not allowed to open, otherwise the internal precision parts may get damaged, or personal injury caused.
DO NOT put the package plastic bags in reach of children or babies. *It might cause asphyxia if children or babies putting the bags into their mouths. DO NOT plug the AC adapter into the outlet in improper situation. *Plugging AC adapter with wet hand might cause electric shock. Plugging AC adapter unsteadily might cause fire or electric shock. DO NOT cover the AC adapter when it is connected to power socket, place the adapter near heaters, and put it on the floor that is equipped with a heater.
DO NOT disassemble or repair the camera, the receiver and other relevant peripheral equipment. *Improper disassembly might cause damages to the product or the peripheral equipment. DO NOT use the receiver on the surface of thermo labile material. *Please embed thermal insulating material when using on the surface of the thermo labile material. DO NOT place or use the AC adapter on temperature sensitive materials. *The above practice might cause the plastic distortion, fading or sticking on the surface.
DO NOT let several cameras with same frequency work at the same time. *The overlap of the electromagnetic wave signal of the same frequency might cause severe interferences and unable to receive signals. Please adjust the brightness on TV or on monitor to achieve optimum efficiency. *There are slight differences of brightness among cameras which can be adjusted DO NOT use the camera in complex environment.
Contents Introduction Package Contents Technical Support 11 11 11 Product Basics 12 Installation Diagram 13 Installation A) Setting up the Receiver B) Setting up the Receiver with TV/Monitor C) Setting up the Camera D) Setting up the Receiver to match camera’s frequency E) Adjust the camera’s focal length 14 14 14 15 15 16 Specification 17 Troubleshooting 19 10
Introduction Thank you for purchasing Mini-AirWatch Wireless Camera Kit. It consists of a Color Video Camera with built-in 2.4GHz Video Transmitter, and a Video Receiver unit which you connect to a TV anywhere in your home (up to 100ft. away from the camera). The Camera converts the video and audio signals into radio signals and transmits them to the Video Receiver. The Receiver converts the signals back to video and audio signals which are fed through a cable to your TV’s or VCR’s A/V input jacks.
Product Basics Camera Antenna Adjustable lens Camera Back Holes for Focus Adjustment Tool ZT-809T CMOS DC8V 2.
Battery Clip 9V Battery Connector (battery included) To Camera Power Jack Installation Diagram 9V battery or 8V AC adapter A / V Cable CH4 CH3 CH2 CH1 SET TV/ Monitor WARNING: When using power adapter, make sure the voltage indications on the adapters are compatible to the devices to avoid potential damages for incorrect usage of power.
Installation A) Setting up the Receiver Connect the antenna to the receiver. CH4 CH3 CH2 CH1 SET B) Setting up the Receiver with TV/Monitor 1) 2) 3) 4) Connect one end of the A/V cable to the A/V out jacks of the Receiver. Connect the other end to your TV/Monitor A/V jacks. Plug the Receiver’s Power Supply (12V DC Adapter) into any wall outlet and plug its jack into the Receiver. Turn the Receiver power switch on.
C) Setting up the Camera 1) 2) 3) 4) Place the camera at desired location. Plug the power adapter or battery clip jack into the power jack at the back of the camera. Plug the power adapter to any DC outlet or plug a 9V battery to the battery clip. Check the Camera Frequency number of each camera at the back. (The receiver will receive signal from camera’s corresponding frequency and display in different channels. For example, Channel 1 on the TV/Monitor will display the picture from Camera 1 only).
E) Adjust the camera’s focal length Adjust the camera’s focal length to make the picture more clear. Adjustable lens Holes for Focus Adjustment Tool AD JUST O C US F Focus Adjustment Tool You can also adjust the TV/Monitor brightness, contrast, color to get the best picture.
Specification Specifications of Camera (ZT-809T) Image Sensor CMOS Total Pixels Horizontal Resolution View Angle Minimum Illumination Video Gain Control Frequency Focus Transmission Power Modulation Mode Bandwidth Microphone Power Supply Consumption Current Operation Temperature Storage Temperature Operation Humidity Dimensions (W x L x H) Weight Mounting Bracket 17
Specifications of Receiver (ZT-707) Receiving Frequency Intermediate Frequency Demodulation Mode Antenna Local Leakage at Input Teminal Receiving Sensitivity Video Output Level Audio Output Level Power Supply Consumption Current Operating Temperature Storage Temperature Operating Humidity Dimensions (WxLxH) Weight *2,400 – 2,483Mhz frequency range: CH1 = 2,414Mhz CH2 = 2,432Mhz CH3 = 2,450Mhz CH4 = 2,468Mhz Actual transmission range may vary according to weather, location, interference & building construc
Troubleshooting Abnormal Phenomena Possible Reasons/Solutions *Check the camera / receiver connected to power supplies, and power on. *Check if the channel of receiver is corresponding to camera; *Check the distance and blocks. *Interfered by other sources; *Check the distance and blocks. *Mismatching system of PAL TV and NTSC cameras or vice versa.
www.securitymaninc.
