SecurityMan ® Mini-AirWatch4 Four 2.
Copyright 2006 by SecurityMan v3.0 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Notice: 2.4Ghz wireless camera works at ISM band. It may cause interferences with other wireless equipment that operates at the same band. Please turn off one of the equipment to eliminate the interference. Product Assurance 2.4Ghz wireless camera will emit electromagnetic wave, just like other wireless products. But the output power of the products is lesser than other wireless products such as mobile phones. The 2.
Conditions Please read the following messages to make sure whether your working environment is suitable. • Ensure there is enough space around the receiver for ventilation. • The temperature should be kept between –20˚C and 50˚C (-4F – 122˚F). The relative humidity should remain from 20% to 80%.
Important Information The user’s manual provides important information for customers to use their products properly, and avoid possible injuries and damages.
DO NOT cover the AC adapter when it is connected to power socket, place the adapter near heaters, and put it on the floor that is equipped with a heater. *The above-mentioned operation might cause fire or incidents. DO NOT use it on airplanes. Please abide by the airways provision. *It might influence the communication aboard and the flying apparatus if departing from the airways regulation. This will result in accident, possible death and severe physical hurt.
DO NOT place or use the AC adapter on temperature sensitive materials. *The above practice might cause the plastic distortion, fading or sticking on the surface. DO NOT touch, shake or hold the aerial. *Touching, shaking or holding the aerial might influence the receiving of electromagnetic wave, and thereby influence the receiving effect.
DO NOT use the camera in complex environment. The obstruction of stumbling block will affect the electromagnetic wave and influence the receiving range. *Wall, tree and other stumbling block might absorb, reflect the electromagnetic wave and influence the receiving range. DO NOT use the camera in the places that are covered by metal. *Places surrounded by metal, such as elevator and cabinet, might shield the electromagnetic wave resulting in signal lost.
Contents Introduction Package Contents Technical Support 10 10 10 Product Basics 11 Setting up the Camera(s) 13 Setting up the Receiver with TV/Monitor 13 Installation Diagram 14 Antenna Adjustment 14 Using Channel Switch on the Receiver 15 Using the Remote Control 15 Remote Control buttons and functions 16 Specification 17 Troubleshooting 19 9
Introduction Thank you for purchasing Mini-AirWatch Wireless Camera Kit. It consists of 4 Color Video Cameras with built-in 2.4GHz Video Transmitter, and a Video Receiver unit which you connect to a TV anywhere in your home (up to 100ft. away from the camera). The Camera converts the video and audio signals into radio signals and transmits them to the Video Receiver. The Receiver converts the signals back to video and audio signals which are fed through a cable to your TV’s or VCR’s A/V input jacks.
Product Basics Camera Adjustable lens Antenna Camera Back Holes for Focus Adjustment Tool CH1 CH2 CH3 CH4 1 2 12 Bracket Dip-Switch AD JUST O C US F Focus Adjustment Tool Power Jack Remote Control Channels Number Channel Down 1 2 3 4 5 6 7 8 Lock/ Unlock Key + Circulator Setup Key Channel Up CHANNEL REMOTE Battery Clip 9V Battery Connector (battery included) To Camera Power Jack 11
Receiver Back AUDIO/R AUDIO/L VIDEO/R DC12V Power Jack (DC 12V, 300mA) Video output (Yellow) Audio output Right (White) Audio output Left (Red) Receiver Front Antenna Channels switch/ circulator IR signal receiving window LED channel display Dip-Switch (Camera) To adjust the dip-switch channel for the camera, use a pointed object to set the dip-switch to desired channel on the back of the camera.
Setting up the Camera(s) 1) 2) 3) 4) 5) Set the camera to desired Dip-Switch Channel Place the camera(s) at desired location. Plug the power adapter or battery clip jack into the power jack at the back of the camera. Plug the power adapter to any AC outlet or plug a 9V battery to the battery clip. Check the Camera Frequency number of each camera at the back. (The receiver will receive signal from camera’s corresponding DipSwitch Channel and display in different channels.
Installation Diagram Camera 1 9V battery or 8V AC adapter Camera 2 9V battery or 8V AC adapter Camera 3 A / V Cable 9V battery or 8V AC adapter TV/ Monitor Camera 4 9V battery or 8V AC adapter WARNING: When using power adapter, make sure the voltage indications on the adapters are compatible to the devices to avoid potential damages for incorrect usage of power.
Using Channel Switch on the Receiver Channel Switch 1) Press the Channel Switch ONCE, to change the channel corresponding to camera. You can view one camera at a time. Ch1 > Ch2 > Ch3 > Ch4 (Press Channel Switch button once, it will change from Ch1 to Ch2 on the TV/Monitor, press again to Ch3 etc) 2) Press the Channel Switch TWICE, it will loop from Ch1 to Ch4 continuously.
Remote Control buttons and functions Function Button LCD Indicator on Receiver Channel Mode 1 ~ Display the input channel Channel Mode _ or + 4 Display the previous or next channel Circulation Mode When is pressed once, it will display a blinking "L". Press the again, it will display circulator setup running " ". Selective Circulation Mode When is pressed once, it will display a blinking "L".
Specification Specifications of Camera (SM-809T) Image Sensor CMOS Total Pixels Horizontal Resolution View Angle Minimum Illumination Video Gain Control Frequency Focus Transmission Power Modulation Mode Bandwidth Microphone Power Supply Consumption Current Operation Temperature Storage Temperature Operation Humidity Dimensions (W x L x H) Weight Mounting Bracket 17
Specifications of Receiver (SM-705) Receiving Frequency Receiving Sensitivity Video format Power Supply Power Consumption Current Operating Temperature Storage Temperature Operating Humidity Dimensions (WxLxH) Weight *2,400 – 2,483Mhz frequency range: CH1 = 2,414Mhz CH2 = 2,432Mhz CH3 = 2,450Mhz CH4 = 2,468Mhz Actual transmission range may vary according to weather, location, interference & building construction.
Troubleshooting Abnormal Phenomena Possible Reasons/Solutions *Check the camera / receiver connected to power supplies, and power on. *Check if the channel of receiver is corresponding to camera; *Check the distance and blocks. *Interfered by other sources; *Check the distance and blocks. *Mismatching system of PAL TV and NTSC cameras or vice versa.
www.securitymaninc.
