SecurityMan ® OutdoorWatch Series 2.
Copyright Notice This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Warranty SecurityMan warrants that this product will be free from defects in materials and workmanship for period of time specified on the product packaging. This limited warranty shall commence from the date of purchase. SecurityMan Products warranty is not transferable and is limited to the original purchaser. If the product is found to be defective then, as your sole remedy and as the manufacturer's only obligation, SecurityMan will repair or replace the product .
Notice: 2.4Ghz wireless camera works at ISM band. It may cause interferences with other wireless equipment that operates at the same band. Please turn off one of the equipment to eliminate the interference. Product Assurance 2.4Ghz wireless camera will emit electromagnetic wave, just like other wireless products. But the output power of the products is lesser than other wireless products such as mobile phones. The 2.
Conditions Please read the following messages to make sure whether your working environment is suitable. • Ensure there is enough space around the receiver for ventilation. • The temperature should be kept between –20˚C and 50˚C (-4F – 122˚F). The relative humidity should remain from 20% to 80%.
Warning: • In order to avoid inflammation or electric shock, this machine should be kept away from exposure to rain or moist, and it shall not be put in or near bathrooms, washing pools, washhouses, moist basements, or swimming pools. • In use of sockets set on walls or extension wires, attention should be paid not to exceed their load capabilities to avoid inflammation or electric shock; • Casings are not allowed to open, otherwise the internal precision parts may get damaged, or personal injury caused.
DO NOT put the package plastic bags in reach of children or babies. *It might cause asphyxia if children or babies putting the bags into their mouths. DO NOT plug the AC adapter into the outlet in improper situation. *Plugging AC adapter with wet hand might cause electric shock. Plugging AC adapter unsteadily might cause fire or electric shock. DO NOT cover the AC adapter when it is connected to power socket, place the adapter near heaters, and put it on the floor that is equipped with a heater.
DO NOT disassemble or repair the camera, the receiver and other relevant peripheral equipment. *Improper disassembly might cause damages to the product or the peripheral equipment. DO NOT use the receiver on the surface of thermo labile material. *Please embed thermal insulating material when using on the surface of the thermo labile material. DO NOT place or use the AC adapter on temperature sensitive materials. *The above practice might cause the plastic distortion, fading or sticking on the surface.
DO NOT let several cameras with same frequency work at the same time. *The overlap of the electromagnetic wave signal of the same frequency might cause severe interferences and unable to receive signals. Please adjust the brightness on TV or on monitor to achieve optimum efficiency. *There are slight differences of brightness among cameras which can be adjusted DO NOT use the camera in complex environment.
Contents Introduction Package Contents Technical Support 12 12 12 Product Basics 13 Installation Diagram 17 Installation A) Setting up the Anntannas B) Setting up the Camera C) Setting up the Receiver D) Setting up the Receiver with TV/Monitor/VCR/DVR 17 17 18 18 19 Specification 20 Troubleshooting 22 11
Introduction Thank you for purchasing OutdoorWatch/ OutdoorWatch4. OutdoorWatch/OutdoorWatch4 is a convenient wireless security camera kit for any outdoor/indoor surveillance of a home or a business. It consists of a wireless camera/4 wireless cameras, a receiver, and needed accessories. Note: Please read the manual entirely before using the product. Package contents: OutdoorWatch • 1 x Wireless outdoor/indoor color camera (SM-823T) • 1 x 4-CH 2.
Product Basics Camera Dip-Switch 1 2 OG ON Antenna GD H0 2 1 OG 2 ON GDH 02 Microphone Built-in (not weatherproof, for indoor use only) Sunshade Infrared LEDs for night vision Bracket (with 2 adjustable viewing angle) Power Jack Receiver CH1~CH4 Dip-Switch Antenna Power Jack LED channel Indicator DC 8V M L OFF ON DC8V 1 2 3 4 CH4 CH3 CH2 CH1 SET A/V Manual Channel Switch Manual/Auto Channel Dip-Switch Audio/Video Output 13
Dip-Switch (Camera) 1 2 OG ON GD H0 2 To adjust the dip-switch channel for the camera, unscrew to remove the front portion of the camera.
Dip-Switch (Receiver) Dip-Switch ON/OFF Switch for different channel (Up=OFF, Down=ON) M L OFF ON 1 2 3 4 Manual Mode Receiver channel will be set manually Loop Mode Receiver channel will loop automatically Basic Dip-switch Setting CH1 CH2 CH3 CH4 Manual Loop Mode Mode OFF OFF OFF OFF ON OFF OFF OFF No Camera Singal received OFF ON OFF OFF OFF ON ON OFF OFF ON OFF ON ON OFF OFF ON ON ON OFF ON OFF ON ON ON OFF ON ON ON ON ON ON ON ON Receiver Status ON OFF ON Channel 1 Camera Singal received
Channel Switch LED channel Indicator CH4 CH3 CH2 CH1 SET Manual Channel Switch If you set the Dip-Switch on the back of the receiver to M (Manual Mode), you can set the receiver to receive desired channel by pressing the Channel Switch. The LED channel indicator light will be on when the desired channel is selected. Sunshade A B For outdoor use, you should attach the sunshade to reduce sun reflection (A). For indoor use, please detach the sunshade from the camera to prevent dark images.
Installation Diagram VCR/DVR Or A / V Cable CH4 AC adapter CH3 CH2 CH1 SET TV/ Monitor WARNING: When using power adapter, make sure the voltage indications on the adapters are compatible to the devices to avoid potential damages for incorrect usage of power.
B) Setting up the Camera 1) 2) 3) 4) 5) Set the camera to desired Dip-Switch Channel Place the camera at desired location. Plug the power adapter jack into the power jack Plug the power adapter to any DC outlet Mark down the Dip-Switch Channel of each camera. (The receiver will receive signal from camera’s corresponding Dip-Switch Channel and display in different channels. For example, Channel 1 on the TV/Monitor will display the image from Camera 1 only).
D) Setting up the Receiver with TV/Monitor/VCR/DVR 1) 2) 3) Connect one end of the A/V cable to the A/V out jacks of the Receiver. Connect the other end to your TV/Monitor A/V jacks. Plug the Receiver’s Power Supply (8V DC Adapter) into any wall outlet and plug its jack into the Receiver.
Specification 20
Troubleshooting Abnormal Phenomena Possible Reasons/Solutions *Check the camera / receiver connected to power supplies, and power on. *Check if the channel of receiver is corresponding to camera; *Check the distance and blocks. *Interfered by other sources; *Check the distance and blocks. *Mismatching system of PAL TV and NTSC cameras or vice versa.
www.securitymaninc.
