PIR-SD User’s Manual PIR Motion Sensor with Hidden Color Camera, SD Recorder, and Remote Control
© Copyright 2012 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Warranty SecurityMan warrants that this product will be free from defects in title, materials and manufacturing workmanship for one year from the date of the purchase or otherwise specified on the package. If the product is found to be defective then, as your sole remedy and as the manufacturer’s only obligation, SecurityMan will repair or replace the product. This warranty is exclusive and is limited to this product.
Table of Contents Introduction Features Important Operating Restrictions Conditions Safety Instructions Package Contents Product Basics PIR-SD Remote Control Set Up Set the Date and Time Adding and Cancelling Remote Control Adding Remote Control Cancelling Remote Control Operation Using PIR-SD Motion Detection Recording Emergency Recording Stop Recording New File Alert SD Full Alert (Memory Full) Playback Recorded Video Integrating with Air-Alarm Series Adding PIR-SD Remote to the Alarm Host Cancelling PI
Introduction Thank you for purchasing SecurityMan PIR-SD. The PIR-SD is a color camera with SD recorder hidden inside a PIR motion detector. This covert motion detector camera blends perfectly into almost any home or business environment where an alarm system might be present and can also be intergraded with any of our SecurityMan DIY Wireless Home Alarm Systems, providing you with both security and discreet monitoring capabilities.
Important This guide provides important information on the use and operation of your PIR-SD. Please read all the information carefully prior to using the product for the best performance and to prevent any damage/injuries or misuse of the device(s). Customers are entitled to have read through this complete user’s manual before using the PIR-SD. Any unapproved changes or modifications will void your warranty. Please ensure to have a complete understanding of the following restrictions.
• DO NOT use this product for any illegal activities. SecurityMan shall not be responsible for any consequences of illegal conducts made by users. • DO NOT put the plastic package bags in reach of children or babies. Young children can choke on these items if they put them into their mouths. • DO NOT plug the AC adapter into the outlet in improper situations. • Plugging in an AC adapter with wet hands might cause electric shock. • Plugging in the AC adapter unsteadily might cause fire or electric shock.
electromagnetic wave, and result in inability to receive signals. • DO NOT use the camera near aggressive chemicals. • DO NOT place the product near any strong magnetic objects • DO NOT disassemble the product. • DO NOT shake or strike the product. • DO NOT attempt to service the product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. The PIR-SD is designed to be, and acts as, a theft deterrent.
Conditions Please read the following messages to make sure your working environment is suitable. • The temperature should be kept between –10˚C and 50˚C (14˚F to 122˚F). The relative humidity should be kept between 20% and 80%. • Avoid putting the product in places where temperature or humidity may change rapidly. • Keep it dry, dustless and avoid exposure directly in sunlight. • Keep product away from heat sources such as electric heater.
Package Contents **SD card not included.
Product Basics PIR-SD Front Back Sensor Window Study Power/USB SD Slot Mini USB Power Socket Mounting Base Detecting LED Camera Remote Control Stop Record Stop Record button Stop/Deactivate Motion Detection and Emergency Recording Study Button Motion Record Emergency Record Motion Record button Start/Activate Motion Detection Recording Emergency Record button Start Emergency Record (1 minute clip) 7
Set Up Set the Date and Time Insert an SD card (note included) “face up” into the SD slot located on the right hand side of the PIR-SD as illustrated below. SD IMPORTANT NOTICE: The PIR-SD required an SD card to be inserted into the SD slot in order for the PIR-SD to function as a motion detector/recorder. Connect the PIR-SD to your PC or Laptop using the USB cable provided as illustrated below.
Once connected, an “Auto Play” pop up window will appear (as shown below) providing various programs for you to use to access and view the stored files. Click on the “Open Folder to View Files” option to open a folder view as illustrated. Double-click on the “GetSysTime” folder, double-click on the “GetSysTime.exe” file located on the SD card, and then click on the “Get System Time” pop up to synchronize your computers time to the PIR-SD. Make sure the computer you are using has the current time and date.
After clicking on the “Get System Time” pop up, a confirmation pop up will appear letting you know that the time and date were set successfully. Click OK to close the window and disconnect the PIR-SD from your computer. NOTE: A “SysTime.bin” file will be created indicating that the date and time was set correctly. Finally, connect the PIR-SD to the USB power adapter and a solid red light will appear in the motion detection window for 30-sec.
IMPORTANT NOTICE: Due to a 2~3-sec delay time to record, we recommend to mount the PIR-SD about 15ft from the intended monitoring object for proper recording. Slide the PIR-SD over the mounting bracket and push it downwards to secure. Adjust the PIR-SD as necessary till you reach a desired viewing angle as shown below. Wall Insert an SD card (note included) “face up” into the SD slot located on the right hand side of the PIR-SD as illustrated below.
Adding and Cancelling Remote Control Adding Remote Control: 1) While plugged into the power outlet, press and release the “Study” button located on the back of the PIR-SD. The PIR-SD will beep once after being pressed indicating that it is in study mode. 2) Press any one of the four buttons on the remote control 2 consecutive times and the PIR-SD will beep 5 times to indicate the remote control has been successfully added to the PIR-SD.
Operation Using PIR-SD Motion Detection Recording To Activate Motion Detection recording, simply press any of the “Motion Record” buttons on the remote control and the PIR-SD will beep once to indicate that motion detection has been activated in stand-by mode. Once activated and motion has been detected after the 8 seconds delay time to exit, the red LED will flash continuously to indicate recording. The PIR-SD will record a 1 minute video clip per motion detection event.
New File Alert After deactivating motion detection or emergency recording, by default the “New File Alert” featured: • Blue LED will stay solid for 5 seconds. • PIR-SD will beep 5 times. To disable the PIR-SD from beeping 5 times, simply press both the “DISARM + ARM” buttons once simultaneously before enabling motion detection or emergency recording and the PIR-SD will beep 3 times to disable the PIR-SD from beeping 5 times on “New File Alert” notification.
1. Remove the SD card from the PIR-SD by gently pushing on the SD card allowing it to pop out from the SD card slot. 2. Insert the SD card into an SD card reader (not included) connected to your PC (your PC should load the SD card as a new Removable Drive). 3. When prompted, select the “Open folder to view files” option to view its contents, you should see two folders labeled SYSTEM and VIDEO. Open the VIDEO folder to view a list of all the recorded events.
Cancelling PIR-SD Remote from the Alarm Host Step1: Press PRGM/SET + Password (system default 888)+ENT+71 +ENT+00+ENT to cancel. NOTE: Please reference the Air-Alarm series user’s manual as needed.
the PIR-SD will beep 5 times to indicate video recording has been successfully enabled. PIR-SD will beep 2 times to indicate failure; please repeat steps 1-2 above. IMPORTANT NOTICE: Enabling video recording when integrating with SM-8808T or SM-8808E Air-Alarm Hosts will have a 2-sec or 3-sec delay time to record respectively due to processing speed.
Host to start alarming and at the same time sends a signal to the PIRSD to start the video recording. Note: To review the recorded video footages, please follow “Playback Recorded Video” section above.
