User’s Manual SM-302 Weatherproof Color Camera with Audio & 100 Feet Cable 1
Copyright Notice This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
SecurityMan 4601 E. Airport Drive, Ontario, CA91761, USA TEL: 909-230-6668 FAX: 909-230-6889 Email: info@securitymaninc.com Website: http://www.securitymaninc.com Copyright 2010 by SecurityMan v2.
Operating Restrictions DO NOT use this product to violate one’s privacy. Monitoring one’s private activities without consent is illegal and this product is not designed or manufactured for those purposes. DO NOT put this product near any medical equipment. Radio waves may potentially cause electrical medical equipment to malfunction. This product should be placed at least 1 foot away from people with a heart pacemaker.
CONTENTS Introduction 6 Package Contents 6 Product Features 7 Product Basics 8 Installation & Setup Camera installation Night vision 9 11 12 Specifications 13 Troubleshooting 14 5
Introduction Thank you for purchasing the SM-302 indoor/outdoor bullet color camera with night vision and audio. It can be input to TV, VCR or DVR for crystal clear sound and picture. Applications for homes and businesses surveillance.
Product Features • D.I.Y.
Product Basics Audio(red) audio ( red ) video(yello w) Video(Yellow) 8
Installation Setup Connect one end of the 100ft power receptacle to the camera’s power input socket, connect the A/C adapter (8VDC 300mA) to the other end of the 100ft cable. Finally, connect the power adapter to an electrical outlet as illustrated below. 100ft AVP cable Connect one end of the 100ft cable to the camera’s yellow socket for video and red socket for audio and the other end to a monitor/TV/VCR/DVR audio/ video input. Turn on the Monitor/TV/VCR/DVR and select AV mode, ie.
Camera Installation angle.
Night Vision 12
SPECIFICATIONS Image Sensor Video Resolution Horizontal Resolution Audio Lens Waterproof Viewing Angle Connector Interface Power Consumption Operating Temperature Operating Humidity Dimensions (WxDxH) Weight (Gross) 1/4” Color CMOS 510x492 (NTSC) 420 TV Lines Microphone built-in 3.6mm IP54 45° Audio/Video(RCA) 200mA(IR ON)/80mA(IR OFF) -10°C~+50°C / +14°F~+122°F 85%RH 2.4”x1.4”x1.4” (camera body) 1.
Troubleshooting Problem Adjust the contrast or brightness on the monitor or TV. Check the DC adapter to be connected to the camera and the other end of the adapter is connected to an electrical outlet. Check to sure the YELLOW cable is connected to the camera and the other end is connected into a monitor or TV video input. Check to make sure the RED cable is connected to the camera and the other end is connected into a monitor or TV audio input.
