SM-400MC User’s Manual Outdoor/Indoor Wired Dome Camera with Night Vision
© Copyright 2013 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Warranty Disclaimers SecurityMan Inc, makes no other warranties, express, implied or otherwise, regarding this product, and specifically disclaims any warranty for merchantability or fitness for a particular purpose. The exclusion of implied warranties is not permitted in some states and the exclusions specified herein may not apply to you. This warranty provides you with specific legal rights. There may be other rights that you have which vary from state to state.
Table of Contents Introduction 1 Package Contents 1 Features 2 Camera Installation 2 Wiring Setup 4 Night Vision 5 Specifications 6
Introduction Thank you for purchasing the SM-400MC wired camera kit. The SecurityMan SM-400MC is an outdoor/indoor dome color camera with night vision. It is designed as a professional security camera for deterring unwanted intruders. Its robust stylistic design makes this a weather-proof camera, night vision up to 35ft of distance in total darkness providing your home or business with the ultimate protection.
Features • Do-it-yourself (D.I.Y.) easy to setup wired camera kit • Robust, weather-proof color dome camera, good for both outdoor and indoor • Conveys strong security presence due to its stylistic dome design • Built-in IR LEDs for night vision up to 35ft (B/W) • Ceiling or wall mountable • Adjustable camera body Camera Installation (a) (b) 1. Choose whether to mount the camera on the ceiling shown in figure (a) or wall-mount shown in figure (b) 2.
(c) Adjustment Point (UP/Down) Mounting Base Pan Adjustment Point (Left/Right) Dome Camera Casing Camera Cover Light Sensor Night Vision LEDs Camera 3. Adjust the cameras vertical angle by loosening the Adjustment Point screw for Up/Down rotation as shown in figure (c). 4. Finally, adjust the horizontal angle or Pan Adjustment Point by turning the dome Left or Right, see figure (c).
Wiring Setup (d) MONITOR OR 100ft VP Cable DVR UNIT SM-400MC 1. Power connection: connect one end of the 100ft VP (video/power) receptacle to the camera’s power input socket, connect the A/C adapter (12VDC, 500mA) to the other end of the 100ft VP cable. Then connect the power adapter to an electrical power outlet as illustrated in figure (d). 2.
3. Adjust brightness, contrast, hue, saturation, and color of the TV/monitor to perfection. Night Vision The built-in infrared LEDs provide up to 35ft of night vision for 24-hour surveillance. The IR LEDs are automatically activated when the amount of light is not adequate to capture a good image. While in night vision mode the picture will become black and white or monochrome.
Specifications Image sensor 1/4” CMOS Color Horizontal resolution 400 TV Lines Effective pixels 500(H)*480(V) NTSC Weather-proof IP45 Backlight Yes Focal length 6mm Viewing angle 35 Degree Number of IR LEDs 18 LEDs IR range Up to 35ft Min. illumination 0.5lux (IR off), 0lux (IR on) Video output 1.