SM-821DT User’s Manual Indoor Pan/Tilt/Zoom Add-on Wireless Camera For DIGILCDNDVR Series
© Copyright 2015 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Warranty SecurityMan Inc warrants that this product will be free from defects in title, materials and manufacturing workmanship for one year or otherwise specified on the product packaging. This limited warranty shall commence from the date of purchase. SecurityMan products warranty is not transferable and is limited to the original purchaser. If the product is found to be defective then, as your sole remedy and as the manufacturer’s only obligation, SecurityMan will repair or replace the product.
Table of Contents Features Important Restrictions Contents Product Basics Front Back Operations Adding our camera to the SM-871DR receiver Specifications 1 1 1 4 5 5 5 6 6 7
Features • Required compatible SM-871DR monitor/receiver • 2.4GHz digital wireless camera for DigiLCDNDVRB and DigiLCDNDVR2 • Pan, Tilt, and Zoom • Increased range of transmission up to 200ft between walls and up to 490ft in clear line of sight • No Wi-Fi interference; no interference from crowded analog devices 900MHz/2.4GHz/5.8GHz/6.
and damage to the equipment, observe the following precautions. PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law. This device should be used only in compliance with all applicable federal, state and local statutes. • DO NOT place this product too close to medical equipment. 1. Radio waves may potentially cause breakdown of medical electrical equipment and thus cause incidents. 2. Place this product at least 22cm from the heart pacemaker.
adapter near heaters, or put it on the floor which is equipped with a heater. The above mentioned operation might cause fire or incidents. • DO NOT use it aboard; please abide by the airway’s provision. It might influence communication aboard and the flying apparatus if departing from the airway’s regulation. This will result in accident, possible death and severe physical hurt. • DO NOT disassemble or repair the camera, receiver or other relevant peripheral equipment s by yourself.
CONDITIONS Please read the following messages to make sure your working environment is suitable. • The temperature should be kept between –10˚C and 50˚C (14˚F to 122˚F). The relative humidity should be kept between 20% and 80%. • Avoid putting the product in places where temperature or humidity may change rapidly. • Keep it dry, dustless and avoid lens exposure in direct sunlight. • Keep product away from heat sources such as electric heaters. • Do not use the camera near harmful chemicals.
Product Basics Front Light Sensor Camera Lens IR LED’s Air Ventilation Microphone Back Antenna Pair Power LED 5 Pair Button Power Socket
Operation Adding your camera to the SM-871DR receiver The SM-871DR is a 4 channel receive and can support up to 4 cameras (SM-816DTX or SM-821DT). To add a camera, make sure that the camera is powered on and is no more than 2 feet away from the receiver and follow the steps below. NOTE: You can relocate the camera after you have successfully added it. 1. Tap the Menu icon on the receiver and then tap on the Settings icon. 2.
3. Now select Camera Pairing from the available options and “keep pressing” (press/release/press/release) the Pairing Button located on the back of your camera until you see a green “Check Mark” on the screen. NOTE: Please repeat the process if a red “X” is displayed at any time during the pairing process.
Specifications ***Required and compatible with SM-871DR monitor/receiver. Operating frequency Imaging sensor type Resolution Minimum illumination LED night vision range Viewing angle PTZ Antenna Power supply Consumption current Transmission rate Transmission distance Operating temperature Storage temperature Operating humidity Dimensions (camera body) Weight 2.
