User Manual

Page.19.
ONVIF PTZ control: Tap the image in the direction you want the PTZ camera to move. Tap the left side of the image to
move left, right to go right, up to go up and down to go down. Compatible IP PTZ cameras will rotate accordingly. PTZ
rotation direction is displayed on top left corner of the image.
Zoom in on an image: Press the key to enter the zoom mode. Press it again to exit zoom mode.
When the image is enlarged tap left, right, up or down on the image to move the whole image on the screen.
IP camera video settings: Click “Video Set” to enter the IP camera’s encoder and resolution settings. Make the desired
changes and click “OK “to save.
Image setting: Click “Imaging Set” to adjust image brightness, saturation, contrast, sharpness and backlight
compensation mode.