Quick Start Guide

ST-IP6FE QUICKSTART GUIDE

● Make sure that there is no reflective surface too close to the

camera lens. The IR light from the camera may reflect back into

the lens causing poor image quality.

● The foam ring around the lens must be seated flush against the

inner surface of the bubble to isolate the lens from the IR LEDS.

Fasten the dome cover to the camera body so that the foam

ring and the dome cover are attached seamlessly.

Ceiling Mounting 2.1

Steps:

1. Drill three screw holes and the cable hole according to the

supplied drill template.

Drill Template Figure 2-1

2. Fix the three supplied screws partially to the ceiling, leaving

enough space to hook the camera body.