User's Guide

 Security Settings
 Idle Time to Logout
For security reasons, the device will automatically log out when the device is
idle over the set idle time. You will be asked to enter your PIN to log in to
your device again.
Note that you can also manually log out and close the display by quickly
clicking the power button.
 Change PIN Code
You may change the device PIN at all times, which was initially set during
device initialization.
 Reset to Factory Settings
All the preference settings including PIN, device name, and the private key
will be wiped off when you confirm to reset the device. To perform this
setting, make sure you already have recorded the 24 recovery words. So
that you can restore your crypto assets from the device or other compatible
crypto wallets in the future.
 Create a Hidden Wallet
Hidden Wallet is for you to create
Follow the steps below to create your Hidden Wallet.
Step 1: Set a PIN (4 ~ 8 digits) which must be different from the device PIN
Step 2: Reenter the PIN you set
Step 3: Set a passphrase ( up to 99 characters)
 Battery Indicator
The battery indicator is only available on V20 and W20 embedded with
rechargeable battery.
The device is full charged.
The battery level is around 75% of full charge.
The battery level is low and suggested to be recharged.
The battery level is extremely low. Please recharge the device
immediately