Instructions / Assembly

SEDONA ISlAND ASSEmbly INStructIONS

Using a manual, or power Philips head screwdriver, remove

all the screws from the crate. Then remove the bottom, rear,

front and two side panels from the shipping crate.

SEDONA ISLAND ASSEMBLY INSTRUCTIONS

Step 1

DO NOT OMIT THIS STEP. If the base is not leveled

correctly the island will be misaligned. The base cannot be

leveled and the island cannot be moved once the assembly

is nished. If you need to reposition the island you will have

to disassemble it and start again.

Step 2

Position and Level the Base

Unpacking the Crate

We recommend 2 to 3 people perform

setup operations.

Place the island base on a level surface

in it’s nal location and proceed to level

it in all directions. The bottom panel has

adjustable feet for this purpose.

TEAM

LIFT

FOR YOUR SAFETY