Data Sheet

TriSource 10 dp3
DIGITALLY POWERED
The TriSource dp features integ-
rated digital amplifier electronics
with a DSP controller. Various fac-
tory-configured presets and volume
settings can be selected.
High-grade electronic components from
the industrial sector and a first-class cir-
cuit design ensure excellent audio qua-
lity with low distortion and a minimal
noise floor. Highly efficient and “intel-
ligent” limiter systems ensure optimum
protection against overload, without re-
stricting the possibilities offered by this
high-performance sound system.
Presets
Flat
This setting provides a linear
frequency response with a neutral
sound characteristics. Standard
setting for many applications.
HP
Switches in a high pass filter for use
in combination with a subwoofer.
Boost
The same neutral response as the
„Flat“setting, but with the addition
of a bass boost.
Soft
Reduces the level in the frequency
range from 2.5 - 5 kHz, to which the
ear is particularly sensitive. This
setting is recommended for high level
reproduction of highly compressed
music tracks.
Mode - key
Switches between control modes
Status, Level and Presets.
Set - key
Setting of various values and
Mute on / off.
Level
Adjustment in 3 dB steps
(-12 dB to +6dB).
Status
Mute LED
Red light when the system
is muted or under technically
critical conditions.
Limit LED
Yellow light when the limiter
is restricting the level.
Signal LED
Green light when the
input signal exceeds -20 dBu
Power LED
Green light when the system
is switched on.
PowerCon (blue)
Power supply
110-230 V / 16 A max.
XLR
Symmetrical analog input
max. Input +25 dBu.
Effective filter protection
against HF interference
and DC Voltages.
Electronically balanced
to prevent noise.
AES Network
Interface for remote
control and audio
transfer via ethernet.
TriSource 10 dp