User manual

TriSource10 dp
5 Operation
10
5.3 Setting level
After switching on and starting up, the TriSource 10 dp is in Status
Mode. Pressing the Mode button once selects the Level Mode, in
which you can adjust the output volume in 3 dB steps. Seven different
values between +6 dB and -12 dB are available, with 0 dB being the
standard setting. The setting is made using the Set button. The green
LED above on the left indicates that you are in Level Mode, whereby
the four vertically arranged LEDs (now lighting up green) indicate the
respectively set value. If two adjacent LEDs light up, the intermediate
value of the printed levels is set.
Level setting options
+ 6 dB
+ 3 dB
- 3 dB
- 9 dB
0 dB
- 6 dB
- 12 dB
5.4 Recalling presets
After switching on and starting up, the TRISOURCE 10 DP dp is in Status Mode. Pressing the
Mode button twice to selects the Preset Mode. Three different presets can be called up using the
set button. The green LED above on the right indicates that you are in Preset Mode. The four verti-
cal LEDs show the selected preset during the selection. If the lower LED lights up in addition to one
of the three LEDs above, the Soft Mode is activated. The following representations show examples
of settings: