User manual

TriSource10 dp

5 Operation

5.4.3 Preset Bank 3 – In-Wall-Mounting

This Preset Bank is to be selected when the TriSource 10 dp is mounted directly in a wall. The

presets are optimized in such a way that the mounting wall besides the TriSource 10 dp is regard-

ed as a acoustically hard reflection surface.

Flat:

Preset for single application without any additional subwoofer.

HP:

Flat preset with a higher cut-off frequency for the high-pass filter for

combination with a subwoofer. The higher cut-off frequency allows a

higher maximum sound pressure level to be achieved.

Low-Boost:

Based on the preset Flat with a low-frequency boost. This setting is

useful in full-range applications in which strong bass reproduction is

required, but a subwoofer cannot be used. The achievable low-

frequency level is, however, limited.

Soft Mode:

Additional reduction at the presence frequency range. The Soft Mode

operates independently of which of the three presets is selected and

is recommended for higher listening volumes.