Datasheet

ManualsBrandsSeeed Studio ManualsDevelopment Boards & Kits6 Axis Accelerometer and Compass

Register description LSM303D

46/52 DocID023312 Rev 2

The D6 - D0 bits set the minimum duration of the interrupt 2 event to be recognized.

Duration steps and maximum values depend on the ODR chosen.

8.38 CLICK_CFG (38h)

Table 79. IG_DUR2 register description

D6 - D0 Duration value. Default value: 000 0000

Table 80. CLICK_CFG register

-- -- ZD ZS YD YS XD XS

Table 81. CLICK_CFG register description

ZD Enable interrupt double-click on Z-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

ZS Enable interrupt single-click on Z-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

YD Enable interrupt double-click on Y-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

YS Enable interrupt single-click on Y-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

XD Enable interrupt double-click on X-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

XS Enable interrupt single-click on X-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)