User manual

MediaTek LinkIt™ Smart 7688 Get Started Guide

Page 10 of 19

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly

prohibited.

Figure 5 LinkIt Smart 7688 Web UI Set Password

2) Set a password using at least 6 alphanumeric characters and click Submit. Enter the

password again and click Sign In.

If the board already has a password and you don’t remember it, use a USB drive to upgrade the

firmware or press and hold the Wi-Fi button for at least 20 seconds and release to return the board to

the factory defaults. Keep in mind if you use either of these methods, it will restore to board’s default

settings and all user data will be removed from the device. For more information on how to upgrade

firmware using a USB drive or use the buttons please refer to LinkIt Smart 7688 Developer’s Guide.

1.3. Update Your Board’s Firmware

The MediaTek Labs website has the latest firmware for your LinkIt Smart 7688 development

board. It is recommended that you upgrade the firmware of your new board to ensure you have

the latest version. This section describes how.