Datasheet

Jetson Nano Developer Kit DA_09402_004 | 2
INCLUDED IN THE BOX
• A Jetson non-production Jetson Nano module (P3448-0000) with heatsink
• A reference carrier board (P3449-0000)
• A small paper card with quick start and support information
• A folded paper stand for the developer kit
DEVELOPER KIT SETUP
Before using your developer kit, you need to set up a microSD card with the operating
system and JetPack components. The simplest method is to download the microSD card
image and follow instructions found in Getting Started with Jetson Nano Developer Kit
.
In summary:
• You need a 16 GB or larger UHS-1 microSD card, HDMI or DP monitor, USB
keyboard and mouse, and 5V⎓2A Micro-USB power supply.
• Download the image and write it to the microSD card.
• Insert the microSD card into the slot under the Jetson Nano module, then attach the
display, keyboard, mouse, and Ethernet cable or wireless networking adapter.
• Connect the Micro-USB power supply. The developer kit powers on automatically.
For alternative methods, see How to Install JetPack
, below.
DEVELOPER KIT INTERFACES
Developer kit module and carrier boards: front and rear views